HM-100-2内耳带口罩机
¥：1.00
| 简要说明 FUNCTION： | |||||||
|
本机台是一台将松紧带以超音波熔合于口罩本体两侧，进而完成耳带式口罩成品的自动化机台。仅需一各操作员将口 罩本体一片片置于输入送带治具上，其余后续动作至成品完成皆由机台自动操作完成。 |
|||||||
|
This machine is used for welding elastics on the both edges of mask blank by ultrasonic. it needs one worker to put the mask blanks on the conveyer belt one by one,then the rest working are finished by the automatic machine. it has a higher output than other earloop machines. |
|||||||
| 产品特点 FEATURES: | |||||||
| 1.机台实密，体积小，占地小； | |||||||
| Machine compacted, small size, small footprint； | |||||||
| 2.PLC程式控制，稳定性高，故障率低； | |||||||
| PLC automatic control program, high stability, low failure rate; | |||||||
| 3.光电检测，降低失误率； | |||||||
| Photoelectric detection, reducing the error rate； | |||||||
| 4.全机台采用铝合金结构，美观坚固不生锈； | |||||||
| Whole machine aluminum structure, beautiful and strong does not rust； | |||||||
| 机器规格 SPECIFICATION: | |||||||
| 1.机台尺寸:1915*855*1780mm. | |||||||
| Machine size: 1915(L)*855(W)*1780 | |||||||
| 2.产量：55pcs/min | |||||||
| Throughput: 55pcs/min | |||||||
| 3.电压：220V | |||||||
| Line source: 220V , 1 or 3 phase | |||||||
| 4.特殊要求：口罩本体尺寸必须固定 | |||||||
| Special requirements: a mask body size must be fixed | |||||||
| 5.功率：2.7KW | |||||||
| Power consumption : 2.7 KW | |||||||
| 6.气压：6KG/cm2 | |||||||
| Atmospheric pressure:6kg/cm2(minimum) |
