主要特性:
*LED/LCD智能显示电压,电池,负载的信息.
*正弦波输出,可带精密仪器的负载
*自动转换电池与在线模式
*旁路输出
*远程控制功能
*保护:超载,高温,低压
规格
MODEL |
LW-500 |
LW-750 |
LW-1000 |
Nominal Power |
500W |
750W |
1000W |
AC Input |
|||
Phase & waveform |
Single phase & Pure Sine Wave |
||
Voltage |
110/120/130VAC or 220/230/240VAC |
||
Acceptable Voltage |
95-126VAC or 194-253VAC±4% |
||
Low Line Disconnect |
85VAC±4% or 184VAC±4% |
||
Low Line Re-connect |
95VAC±4% or 194VAC±4% |
||
High Line Disconnect |
136VAC±4% or 263VAC±4% |
||
High Line Re-connect |
126VAC±4% or 253VAC±4% |
||
Frequency |
50Hz:41-54Hz 60Hz:51-64Hz |
||
AC Output |
|||
Phase & waveform |
Single phase & Pure Sine Wave (bypass mode sync to input) |
||
Voltage |
110/120/130VAC or 220/230/240VAC±10%rms (bypass mode sync to input) |
||
Frequency |
50Hz±0.3Hz 60Hz±0.3Hz (bypass mode sync to input) |
||
Peak Power |
3 times of rating power |
||
Short Circuit Protection |
Yes, shutdown after 10ms |
||
Power Factor |
0.9-1.0 |
||
DC Input |
|||
Battery Voltage |
12VDC or 24VDC |
||
Minimum Start Voltage |
10VDC or 20VDC |
||
LowBatteryAlarm |
10.5±0.3vdc or 21±0.6vdc |
||
Low DC input Shut-down |
10±0.3vdc or 20±0.6vdc |
||
High DC input Alarm & Fault |
16±0.3vdc or 32±0.6vdc |
||
High DC input Recovery |
15.5±0.3vdc or 31±0.6vdc |
||
MAX Charger Current |
20A/35A (According to the Inverter model) |
||
System parameter |
|||
Battery Mode Efficiency |
>85% |
||
Line Mode Efficiency |
>96% |
||
power saver |
Load <=25W (Enabled on “P/S auto” setting of Remote control) |
||
Audible Alarm |
Sounding when the heat sink’s tem is over 100℃ and shutdown after 30 seconds. |
||
Over Load Protection |
110% <LOAD< after Fault and 1s, every 0.5s beeps> Load>150%, beeps 0.5s every 1s, and Fault after 20s. |
||
Protections |
low battery、over charging、over temp、over load |
||
Communications |
RS-232/USB/SNMP(custom-made) |
||
Operating Environment |
0-40℃,0-90%RH(non-condensing) |
||
Audible Noise |
<60dB |
||
Net Weight(KG) |
8.5kg |
11kg |
14.5kg |
Dimension L X W X H |
380 X182 X160mm |