紧密薄板分切机|中升机械|分切机生产厂家

  该机主要用于加工大理石薄板、复合板既可把2cm板材分切成多片，也可直接用荒料切成等板。吸收了国内外同类机种的特点，造型简洁美观。切割进给速度采用变频器调速，进给速度根据加工不同介质（不同硬度）而调节，设备运行平稳、效率高。采用油压补偿锯片疲劳装置，延长了锯片使用寿命，保障板板平整度提高生产效率，降低生产成本。This machine is mainly used for processing marble plate,compsite boards can put 2cm sheet is cut into slices,but

also can directly use the blocks into board.At home and abroad to absorb the same types of aircraft characteristics,

simple and beautiful shapes.Cutting feed with stepless speed,feeding speed according to the processing of different

medium(hardness)and regulation,smooth operation,high efficiency.The pressure compensation device of saw blade

fatigue,prolonging the service life of saw blade,escurity sheet formation and inprove production efficiency,reduce the

production cost.

瓷砖切割机安全操作规程：

   1.没有通过过培训掌握操作技能不得操作切割机。若要操作要得到保管人的许可，并要有专人指导和监护。

   2.工作前劳保穿戴齐全，袖口，衣襟要扎紧。必须戴防护眼镜，防止发生屑伤眼睛事故。

   3.在工作前要检查各机械部件（如锯片、台面、螺丝、链条、电机、开关按钮等）是否正常。如发现问题应报告维修班修理，排除故障后方能开机。

   4.有裂纹、不平滑、缺齿和钝齿的锯片不能使用。更换锯片时必须把电源断掉，锯片要安装牢靠，垂直于轴中心线，运转时不得有跳动现象。

   5.检查防护挡板是完整有效，不得任意拆改。活动的防护挡板不得随意迁移。

中升机械由1996年开始附设厂于广东省肇庆市，依然以自我开发创设“CS”品牌的石艺机械产品。同时随着石饰不断广泛发展工艺需求，中昇系列产品不断改良创新，精益求精，品质功能优良，已赢得普遍中外用户确认，因此“CS”中升产品信誉昭著！品质与fu务诚信可靠。

By the beginning of 1996 Zhongsheng machine factory in Guangdong province with the city of Zhaoqing, is still in self development to create 'CS' brand of stone art of mechanical products. At the same time, with the continuous development of decorative stone wide process requirements, or series of product innovation and continuous improvement, excellence, quality excellent, has won widespread recognition of Chinese and foreign customers, so 'CS' or the credibility of products! Quality and service integrity and reliability.