PA66 FE3071 NC010 中粘度,注塑和挤出级

Zytel® FE3071 NC010 | PA66 NYLON RESIN

Regional Availability

North America, South and Central America

Processing

Injection Moulding, Film Extrusion, Profile Extrusion, Sheet Extrusion, Other Extrusion, Coatable, Casting

Delivery form

Pellets

Product Text

Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured.

The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.

Zytel® FE3071 NC010 is an intermediate viscosity polyamde 66 resin for injection moulding and extrusion.

Injection molding

PREPROCESSING

Drying recommended = Yes, if moisture content of resin exceeds recommended level

Drying temperature = 80℃

Drying time, dehumidified dryer = 2-4 h

Processing moisture content = <0.05 %

PROCESSING

Melt temperature optimum = 290℃

Melt temperature range = 280-300℃

Mould temperature optimum = 70℃

Mould temperature range = 50-90℃

PROPERTIES