Spiral bevel gear milling machine MLT-YK2215A
面议
Feature
1 AI series six-axis five-link intelligent control system, touch screen control, and humanized operation interface.
2.Vertical machine tool structure, embedded bottom chip removal design, iron chips fall directly into the chip conveyor to avoid hot chips accumulation affecting the accuracy, and at the same time facilitate machine tool cleaning.
3.The high-speed servo motor directly drives the cutter head to eliminate the transmission chain error, improve the accuracy, and maintain the long-term accuracy of the machine tool. The maximum speed can reach 2000r/min.
4.The machine tool is easy to operate and does not require complicated calculation formulas. You only need to input basic parameters according to the drawings and the system will perform automatic calculations.
Parameter
|
Description |
Value |
|
Max.processing module |
4M |
|
Max. transmission ratio |
10:1 |
|
Max.whole depth |
10mm |
|
Max. face width |
28mm |
|
Max. pitch cone distance |
70mm |
|
root cone angle |
0°--90° |
|
No. Range of teeth |
4~200 |
|
When using a 4.5" cutterhead to process gears with a helix angle of 30°, the maximum pitch diameter of the gear |
100mm(transmission ratio2:1) |
|
120mm(transmission ratio10:1) |
|
|
Cutter head diameter |
0.5”---4.5” |
|
tool spindle rotation speed |
0~2000rpm |
|
X-axis travel——level movement |
-120~160mm |
|
Z-axis travel——vertical movement |
-50~180mm |
|
Y-axis travel——back and forward movement |
-80~80mm |
|
Distance from machine tool center to workpiece spindle end face |
65mm |
|
Workpiece spindle taper hole |
Morse #5 |
|
Workpiece shaft hole big end diameter |
44.40mm |
|
Cone length |
110mm |
|
Spindle through hole diameter |
20mm |
|
X-axis drive torque——level |
15Nm |
|
Z-axis drive torque——vertical |
15Nm |
|
Y-axis drive torque——back and forward |
15Nm |
|
A-axis drive torque——Root cone swing angle |
10Nm（1：144） |
|
C-axis drive torque——workpiece spindle |
180Nm |
|
B-axis drive torque——tool spindle |
100Nm |
|
coolant motor power |
0.55kw |
|
Hydraulic motor power |
0.75kw |
|
Floor Space(L*W*H) |
2700×1800×2300(mm） |
|
Machine weight |
4500kg |
