Hollow shaft, this is a specific type of shaft, but also need to have a comprehensive understanding and correct understanding, because only in this way can realize the correct and reasonable use of the product, and make full use of the hollow shaft, thus, can avoid product waste and other problems, you can also get this aspect of professional knowledge.

1. Should the hollow shaft be carefully purchased?

From a professional point of view, the purchase of hollow shaft should be carefully treated and carried out, because if the wrong choice occurs, it will affect the normal use and use effect of the product, or even make the product unable to use and cause waste. Based on these two points, the above conclusions and specific requirements will be made. And it turns out that the answer to this question is yes.

2. How to choose the hollow shaft with good quality?

In order to choose the hollow shaft with good quality, the following two points are required: first, have a clear understanding of the use demand, and determine the price range of the product that they can afford; The second is to choose professional and regular manufacturers, to ensure product quality and product performance, and then, to ensure the use of products.

3. Piston rod, which has precision piston rod, does the hollow shaft have precision hollow shaft?

Piston rod, which is a specific type of precision piston rod, and hollow shaft, which is a specific type of precision hollow shaft. And precision hollow shaft on the consideration of choose and buy compared with ordinary hollow shaft can be know that they are in the basic factor is the same, all is for the product origin, size, parameters, price, quality, and manufacturers such as these, but on some targeted consideration, is not the same, there is a difference.

4. Why hollow shafts are often used for transmission shafts in engineering? From the perspective of engineering mechanics?

Engineering of the drive shaft with hollow shaft is more, from the Angle of the engineering mechanics to explain, the specific explanation is as follows: load is divided into torque, bending moment and torque of the three, if the shaft torque effect, so the edge of the cross section of the shear force is bigger, and the center basic don't stress, therefore, the hollow shaft can effectively save material and make full use of the material, and using solid shaft, has a great influence on the resistance torque ability won't, but there will be a waste of material. Therefore, based on this, use hollow axis instead of solid axis.

5. What parts of a car are hollow shafts? How to use hollow shaft with reducer?

Car hollow shaft, from a professional point of view, it refers to the car's hollow drive shaft this part. When the hollow shaft is used together with the reducer, there are different coaxial tolerances under different connection modes. If the connection mode is key, the shaft tolerance is j6. The shaft tolerance is h6 if the connection is for locking disc.