How to fix the projector
Floodlights are landscape lighting fixtures we often see, often installed in the corners of buildings or tree trunks. If installed on a tree, will it affect the tree? So how to fix the LED projector?
In order to reduce the friction between the hoop support and the tree trunk, a 4mm thick black rubber pad is used on the inside of the hoop support. At the same time, in order not to affect the beauty, the rubber mat cut into a wide strip with the hoop, fixed on the hoop with tie wire, when the installation and fastening in place, the rubber gasket first force, after appropriate tightening and then install throwing light lamps, so as to effectively ensure that bark will not be damaged.
In addition, in the process of the growth and thickening of the trunk, the rubber skin itself has a certain cushion, and the hoop nut is unscrewed twice a year according to the growth of the tree, so the hoop will not cause damage to the tree.
Finally, because the LED projector is a cold light source, it adopts active heat dissipation design, and the practical time is no more than four hours. So the thermal damage to the trees during installation is negligible.
In order to reduce the friction between the hoop support and the tree trunk, a 4mm thick black rubber pad is used on the inside of the hoop support. At the same time, in order not to affect the beauty, the rubber mat cut into a wide strip with the hoop, fixed on the hoop with tie wire, when the installation and fastening in place, the rubber gasket first force, after appropriate tightening and then install throwing light lamps, so as to effectively ensure that bark will not be damaged.
In addition, in the process of the growth and thickening of the trunk, the rubber skin itself has a certain cushion, and the hoop nut is unscrewed twice a year according to the growth of the tree, so the hoop will not cause damage to the tree.
Finally, because the LED projector is a cold light source, it adopts active heat dissipation design, and the practical time is no more than four hours. So the thermal damage to the trees during installation is negligible.
郑重声明：资讯 【How to fix the projector】由 Zhongshan Shoubin Lighting Technology Co., Ltd. 发布，版权归原作者及其所在单位，其原创性以及文中陈述文字和内容未经(企业库qiyeku.cn)证实，请读者仅作参考，并请自行核实相关内容。若本文有侵犯到您的版权， 请你提供相关证明及申请并与我们联系（qiyeku # qq.com）或【在线投诉】，我们审核后将会尽快处理。
—— 相关资讯 ——
![汉中[百度新闻]硬包床头背景墙](http://p17.qiyeku.cn/2017/6/28/mnkzs/news/news_pic/image/2017_08_07/20170807122713785.jpg)
